Please be advised that performing this factory reset will remove all call logs, call history, saved contacts, or any other data you may have on the device. Once the device is on the new platform, everything gets backed up to our FTP server so that any loss of data from that point forward can be restored. |
When using our new provisioning system, all you need to do for the changes to take effect is to factory reset your device in a specific way. Please follow this guide on doing so to ensure that your phone gets updated without having to worry about it not working properly.
You will then be asked to enter password. Please enter 3636 (or 456 if that does not work) and then select OK.
You will then see the following menu. Using the direction pad, scroll all the way down to the very bottom of this page and select the Reset to defaults option
After you have completed these steps, your phone will reach our provisioning server and will program your extension onto it. Do not be alarmed if you see that your phone is updating. This process could take up to 5 or so minutes depending on your network.
If the phone did not successfully provision after the reset of the device, please follow the steps in the below documentation.
How to Manually Enable Zero Touch Provisioning on a Polycom IP 331
Also if your phone appears that it is not updating after you have followed these steps please go ahead and unplug the power to the device and plug it back in. In most cases this will fix the issue. If you have any questions or need some help during the process please do not hesitate to call our support line at 416-479-0993 option 3.