This guide will walk you through the steps to managing IP security inside the DaFeeder.
You can find IP Authorization Settings by navigating to SYSTEM >> AUTHORIZATION.
To lock down an IP in the DaFeeder click on 
. Once Enable IP Lock has been toggled, it will turn blue indicating IP Lock is active. When active Dafeeder can not be accessed from any other IP unless added as an authorized IP.
| Warning |
|---|
Internet |
To allow any/all IP addresses the ability to connect to Dafeeder Toggle Enable IP Lock until it is grey shaded indicating IP Lock is turned off.
To add an IP click on Add IPv4 Address and enter the IP address and a description if needed. To remove simple click Remove and before exiting click Save Changes to apply changes.
See the following as an example:
There is no content on this page.